Ryvyr RVE180XXX User Manual download pdf

SUGGESTED TOOLS AND MATERIALS

ABOVE COUNTER INSTALLATION

INSTALLATION INSTRUCTIONS

REFLEX GLASS

VESSEL SINK

ALL MODELS

09.2014

For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time

• Never use a strong / abrasive cleaner. Always test your cleaning solution on an unnoticeable area before applying it to the

entire surface.

• Wipe surfaces clean, immediately after applying cleaner.

• Do not allow the cleaner to sit or soak. Never let cleaners sit on the surface of the lavatory.

• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.

They will scratch the lavatory surface.

• Always rinse and wipe clean the fixtures to prevent soap buildup.

CARE AND CLEANING

Adjustable Wrench Channel Lock Tape Measure Safety Glasses

10'

STEP 1:

Cut out a 1 3/4” hole on the counter-top for the drain. Please refer to the cutout template.

STEP 2:

Carefully, position the sink in the cutout opening. If you have mounting ring, place the mounting ring on the counter-top before

positioning the sink.

STEP 3:

Use moderate force and hand-tighten the drain kit to the sink to secure it on the counter-top. It may be necessary to cut part of the

tail-piece or part of the horizontal leg in order to make fit to existing plumbing.

mounting ring

CAUTION! Do not over tighten the drain assembly as this may cause the bowl to forcefully crack during installation or at some

time in the future.

YOUR GLASS VESSEL SINK

BEFORE YOU BEGIN

All vessel sinks do not have an overflow and may require a specific type of drain such as a pop-up, twist and turn, or a grid drain

assembly. Please check your local plumbing codes to determine which drain will meet local plumbing code standards for this product.

• Observe all plumbing and building codes..

• Follow these instructions only if it apply to your installation. Vessel sinks allow you to be creative and flexible with your installation.

• Before installation, remove your new glass sink and carefully inspect it for damage. Return the glass sink to its packaging until you

are ready to install it.

• These instructions contain important care and cleaning instructions. Please review these instructions carefully.

™

by RYVYR

1 2

REFLEX GLASS 1

Summary of Contents

Page 1 - REFLEX GLASS

SUGGESTED TOOLS AND MATERIALSABOVE COUNTER INSTALLATIONINSTALLATION INSTRUCTIONSREFLEX GLASSVESSEL SINKALL MODELS09.2014For customer support please vi

Page 2

LAVATORY O 1 3/4"CUT ALONG THIS LINE© 2014 RyvyrABOVE-THE-COUNTER INSTALLATION**To print to actual scale, on printer settingschange PAGE SCALING

Related models: RVE165XXX

Comments to this Manuals

No comments